Ad Marking in MAX in 2026: When You Need an Erid Token and How to Avoid Fines up to 500,000 ₽Article · digest for November 19
A marketer's desk with a laptop, ORD cards, and a draft ad post in the MAX messenger labeled with an erid token.
Article4 sections≈ 9 min

Ad Marking in MAX in 2026: When You Need an Erid Token and How to Avoid Fines up to 500,000 ₽

When a business enters MAX for traffic, the first catch lies in how the platform works. Yandex and VK have their own ad data operators (ORD), so their ad dashboards add labels automatically. MAX has no such built-in service. If you run targeted ads through Yandex Direct, the label is added automatically. However, when you buy a post from a channel admin or publish a promo on your own channel, all paperwork falls on you. The law forbids adding a token retroactively after a post goes live. The messenger follows the general rules of Article 18.1 of the Federal Law "On Advertising" and Article 14.3 of the Administrative Offenses Code (KoAP RF), and fines stack per publication. Two posts without a token can already cost a legal entity up to 1 million ₽.

According to the eLama Blog guide, the whole system rests on four concepts. A creative is the exact text, image, or video you plan to publish. An ORD is an accredited intermediary (such as services by Yandex, VK, or Ozon) that registers this creative, issues a unique erid token, and sends a report to ERIR. ERIR is Roskomnadzor's unified register that stores data on the advertiser, platform, budget, and impressions. This also creates a tax risk under Clause 44, Article 270 of the Russian Tax Code: if ad data doesn't reach ERIR, you can't deduct those costs from your corporate profit tax.

Where Content Ends and Advertising Begins in MAX

The line is drawn by a simple rule: if a post highlights a specific product and nudges readers to buy it, you need an erid. The law looks at the content of the post, and the rules are the same for third-party channels and your company's own blog.

ORD registration is mandatory in six cases: targeted ads from external dashboards, paid placements in other channels, native integrations and sponsored video notes from creators, giveaways aimed at promoting a product or channel, social ads with a special label, and self-promotion in your own channel. You don't need a token for helpful tips and news without a call to buy, or for direct-message broadcasts and push notifications. In native integrations, there is only one exception: when a brand simply appears in the story without praise or an order link.

The most common trap hides in a brand's own channel. Let's look at a contrasting tableware store example from eLama's guide:

Information (no token needed): "Ceramic 350 ml mugs are now in the 'Tableware' section," listing white and blue colors and a price of 790 ₽.

Self-promotion (token needed): "Mug of the week: the blue 350 ml ceramic mug. Get 20% off until Sunday with promo code BLUE. Order your mug via the link."

The first post stays an informational update if the store publishes assortment news regularly and in a uniform style. In the second, one item is pulled from the catalog with a discount deadline and a direct call to order. Under FAS Russia clarifications, the regulator evaluates the full context: site-wide banners, pop-ups, and long-term pinned promo posts count as self-promotion. If a post with a promo code is borderline, it's safer to register a token in advance.

Targeted Ads, Exchanges, or Direct Placements: Who Handles the Token

Responsibility in MAX depends on how you buy the placement. When launching through Yandex Direct or VK Ads, the platform acts as the ORD itself, so you only need accurate company details in your account settings. Exchanges like Telega.in also handle registration and reporting. In a direct deal with a channel owner, the parties split tasks manually.

Launch Method in MAXWho Marks and ReportsAdvertiser's Task Before Launch
Targeted ads in Direct or VK AdsPlatform's built-in ORDFill in company details in the ad account
Placement via an exchange (Telega.in)The exchange under its rulesSubmit details and approve the post
Direct placement or native integrationThe party named in the contractDefine roles and register the post via an ORD

If you go for a direct placement, the law divides risk strictly. The advertiser is responsible for accurate company details: listing only an agency instead of the end brand is a violation and leads to a fine. The channel owner is responsible for publishing the post with the ad label, advertiser details, erid, and later reporting views. If a channel has over 10,000 subscribers, it must be in Roskomnadzor's register; otherwise, buying ads there is strictly prohibited. When a creator refuses to mark a post, fine risks fall on both sides.

An agency can take full responsibility for registration and closing documents under a contract: it answers for distorting submitted data, while the client answers for completeness. Individuals and self-employed creators can also act as advertisers or channel owners by listing their full name or a link to a page with their details. Their marking duty is the same, though fine amounts are lower.

Five Steps for a Placement and Working Post Templates

Preparing a direct post or a borderline promo post takes five steps:

  1. Choose an accredited ORD from Yandex, VK, Ozon, or another provider by comparing rates and interfaces for your post volume.
  2. Create an end-advertiser profile in the ORD with the company name and tax ID (INN), add contractors, and specify in the contract who requests the token and submits closing acts.
  3. Upload the final text, image, or video to the ORD, set its format, type, and description, and get an erid before publishing. The "1 creative — 1 token" rule applies: 10 text variants require 10 tokens, and any edit before publication voids the old token.
  4. Put three elements in the post: the exact Russian word "Реклама" (Ad) without quotes or substitutes like "partner material", the brand's legal details or a link to them, and the erid.
  5. Submit impression stats and closing act data after the ad runs.

Where you place the erid depends on whether there is a link. If the post leads to a website, embed the token in the URL and put the label and legal details at the bottom:

Ad message text with a link https://site.ru/?erid=XXX

Реклама. Romashka LLC, INN 1234567890.

This keeps the long code out of the main copy while letting the tracking system log every click. If you shorten the URL, check right away that the token tail stays intact.

If there is no external link in the text, such as an @mention or a promo in your own channel, add the identifier on a separate line:

Ad message text without an external link.

Реклама. Romashka LLC, INN 1234567890. erid: XXX

For images, place the label, brand details, and erid over the picture or in the caption. For videos, overlay them on the frame or show them at the very start. There is one main requirement: the text must be easy to read on a phone screen.

ERIR Reporting, Splitting Acts, and Fines

After publication, you must report to the ORD within 30 calendar days after the placement month ends. For October ads, data is due by November 30 inclusive.

If several posts ran in one channel under a single closing act, you do deallocation in the ORD, splitting the total sum across each creative. In eLama's example, a store ran two posts in one MAX channel in October with different tokens under one act for 12,000 ₽. The first post went live on October 8, got 4,200 impressions, and cost 7,000 ₽. The second went live on October 22, got 2,800 impressions, and cost 5,000 ₽. In the ORD, you enter the contract, act number and date, both erid tokens, view counts, and allocate 7,000 ₽ to the first post and 5,000 ₽ to the second. If an act shows one lump sum without a breakdown, clarify the amounts with the contractor before filing. The 3% online advertising fee in effect since 2025 under Article 18.2 of the "On Advertising" law belongs to a separate payment track and does not replace ERIR reporting.

Marking violations are punished under Article 14.3 of the KoAP RF, and a single post can trigger fines under multiple clauses at once.

ViolationKoAP ArticleIndividualsOfficials & Sole ProprietorsLegal Entities
No erid token or placement errorsPart 16, Art. 14.330,000 – 100,000 ₽100,000 – 200,000 ₽200,000 – 500,000 ₽
No ERIR report or data errorsPart 15, Art. 14.310,000 – 30,000 ₽30,000 – 100,000 ₽200,000 – 500,000 ₽
No "Реклама" label or legal detailsPart 1, Art. 14.32,000 – 2,500 ₽4,000 – 20,000 ₽100,000 – 500,000 ₽

Five posts without a token can cost a company up to 2.5 million ₽. A separate Part 17 of the same article fines the ORDs themselves for data transfer failures: 100,000 to 200,000 ₽ for officials and 300,000 to 700,000 ₽ for companies.

Pre-Publication Checklist for a MAX Placement

  • If the channel has over 10,000 subscribers, verify it in Roskomnadzor's register.
  • Specify in the contract who obtains the erid and who submits ORD reports.
  • Fill out the end brand's profile in the ORD with its name and INN instead of listing only an intermediary.
  • Upload the final text and media to the ORD and get the token before the post goes live.
  • Include the word "Реклама" (without quotes), advertiser details, and a valid erid in the post.
  • Set a reporting deadline 30 calendar days after the publication month ends.
Want a deep diveVotes help us choose what to break down in detail. This material has 0 votes.
Sources · 3